Siemens HiPath 4000 - Manual (Page 24)

Step by Step
Make a call – Comfort Functions
24
Using the switchover key
You can use the switchover key, which must be in-
stalled by the system administrator beforehand, for the
following functions:
•
Consultation (back to the waiting party or back to
the waiting conference)
• Toggling
• Accepting a waiting call (the call-waiting function
must be activated see
page 22 )
• Accepting a group call
Call waiting
You hear a camp-on busy tone.
Press the flashing key. You accept the camp-on call.
The lamp comes on.
Toggling
You are connected to two subscribers: one is waiting.
The switchover key is illuminated.
Press the key to select the other subscriber. The first
subscriber is waiting.
Consultation
You call a second subscriber. The second subscriber
does not respond.
Press the key to return to the waiting subscriber or the
waiting conference.
Group calls
You are connected to a subscriber. There is a pending
group call.
Press the flashing key. You accept the group call; the
1
st
subscriber is put on hold. The lamp comes on.
Switchover
Switchover
Switchover
Switchover