Siemens HiPath 4000 - Manual (Page 26)

Step by Step
Make a call – Comfort Functions
26
Parking a call and picking it up within
the call pickup group
You can park a call within the call pickup group on one
telephone and then continue it at a different telephone.
Parking the call:
Press the key. The key flashes at all phones in the team.
t Replace the handset.
Resuming the call:
Press the flashing key. Continue the call.
System-wide parking
On the HiPath 4000, you can park up to 10 internal and/
or external calls and take them at another telephone.
There are two ways of parking a call:
•
Manual parking
• Parking with the "system parking key"
Parking is not possible if:
•
The park position you want is occupied
• The subscriber is the operator
• The call is a consultation call
• The call is a conference call
Parking a call
You can automatically park a call to your telephone in a
free parking position and take it at your telephone or an-
other telephone.
Parking via the keypad
Press key. The lamp comes on.
p Enter the system code for system parking (if you have
any problems ask the system administrator).
d ... m Enter and note a parking position number (0 to 9).
The call is parked.
t Replace the handset.
Call park
Call park
Consultation
Enter the code!