Deactivating identification at the other telephone – Siemens HiPath 4000 User Manual
Page 44
Advertising
Step by Step
Further functions/services
44
Dialling after (successful) identification:
You hear the dial tone.
or
p
Enter a number immediately.
Call forwarding – follow me after successful identi-
fication
qeh
or
qhee
UK code or Standard code/Euro code.
or
die bei Ihnen eingerichtete Kennzahl eingeben.
t
Replace the handset.
Deactivating identification at the other
telephone
n
Lift the handset.
rl
or
rih
UK code or Standard code/Euro code
or
Enter the code which has been programmed for you.
t
Replace the handset.
Enter the code!
Enter the code!
Depending on the configuration of the system,
identification is deactivated automatically if the
far-end telephone is not used for several min-
utes.
Advertising