Sharp AR-C200P - Manual (Page 179)

Sharp AR-C200P: Specifications • 179
Specifications
Print method. LED exposed light source electronic photographic
memory
Resolution 600 x 1200 dpi
Colors Cyan, magenta, yellow, black (CMYK)
CPU Power PC 750 processor, 32 bit RISC CPU, 450 MHz,
64 bit
Memory 64 Mb standard
• 128 Mb required for the optional Duplex unit
• Up to 1 Gb max with optional memory modules
Print language PostScript3, PCL5c
Internal font PostScript 3, PCL5c fonts
Print Start First print time: 10 secs (mono), 15 secs (color)
Warm up time: 90 secs
Parallel Interface IEEE Std 1284-1994 parallel
Connection: 36-pin receptacle
Cable: IEEE Std 1284-1994 compatible cable of up to
1.8 meters
Transmission Mode: Compatible, Nibble mode ECP
Interface Level:
• Low +0.0 – 0.8V
High+2.4 – 5.0V
Universal Serial
Bus (USB)
interface USB specification Version 1.1
Connection: USB Type B
Cable: USB specification Version 1.1 cable (shielded)
Transmission Mode: Full speed (12 Mbps + 0.25%
maximum)
Power control Self-powered device