Sharp AR-C200P - Manual (Page 62)

Sharp AR-C200P: Setting up • 62
System Adjust Menu
The default settings are bold .
Item Value Description
X ADJUST
0.00 MM;
Range +0.25 TO +2.0
MM and – 2.0 TO –
0.25 MM in 0.25 mm
increments Adjusts overall print position
horizontally in 0.20 increments.
Y ADJUST
0.00 MM;
Range +0.25 TO +2.0
MM and – 2.0 TO –
0.25 MM in 0.25 mm
increments Adjusts overall print position
vertically in 0.20 increments.
DUPLEX X ADJUST
0.00 MM;
Range +0.25 TO +2.0
MM and – 2.0 TO –
0.25 MM in 0.25 mm
increments Adjusts overall print position of
print face horizontally in 0.20
increments.
Displays only when optional
Duplex Unit is installed.
DUPLEX Y ADJUST
0.00 MM;
Range +0.25 TO +2.0
MM and – 2.0 TO –
0.25 MM in 0.25 mm
increments Adjusts overall print position of
print face vertically in 0.20
increments
Displays only when optional
Duplex Unit is installed.
TRAY 1 LEGAL 14
LEGAL 14; LEGAL
13.5 Sets Tray 1 legal paper size.
TRAY 2 LEGAL 14
LEGAL 14; LEGAL
13.5 Sets Tray 2 legal paper size.
Appears only if optional Tray 2 is
installed.
TRAY 3 LEGAL 14
LEGAL 14; LEGAL
13.5 Sets Tray 3 legal paper size.
Appears only if optional Tray 3 is
installed.
PCL TRAY 2 ID#
1 to 59; default = 5 Sets Tray 2 number for PCL
emulation.
Appears only if optional Tray 3 is
installed.
PCL TRAY 3 ID#
1 – 59; default = 20 Sets Tray 3 number for PCL
emulation.
Appears only if optional Tray 3 is
installed.
PCL MP TRAY ID#
1 – 59; default = 4 Sets MP tray number for PCL
emulation.