Sharp AR-C200P - Manual (Page 47)

Sharp AR-C200P: Setting up • 47
CYAN
REGISTRATION -
FINE ADJUST
0+1+2+3-3-2-1
Fine Adjust makes an adjustment
to image registration in Cyan,
Magenta or Yellow against Black
in the horizontal direction. The
adjustment is reflected as an
offset (addition) value to the
corrections through Auto color
Registration Correction. Values
are adjusted in increments of
.026 mm. Example: if the paper
movement is upward - if a value
is increased (+) it means the
image moves downward in
relation to it.
MAGENTA
REGISTRATION -
FINE ADJUST
0+1+2+3-3-2-1
YELLOW
REGISTRATION -
FINE ADJUST
0+1+2+3-3-2-1
INK SIMULATION
Off; SWOP The printer has its own process
simulation generator which simulates
standard colors in the printer.
This function is enabled only with
Postscript language jobs.
INK LIMIT
Dark; Medium; Light Selects the limit of the toner layer
thickness. If paper curl occurs in
DARK printing, select MEDIUM or
LIGHT. This sometimes helps reduce
curl.
CMY 100%
DENSITY
Disable; enable Selects enable/disable 100% output
against the CMY100% TRC
compensation. Ordinarily, the TRC
compensation function controls the
appropriate print density; thus, 100%
output is not always enabled.
Selecting ENABLE will allow 100%
output. In actual printing, the TRC
values, too, are controlled by color
Matching. This function is used for
special purposes; for example, to
specify the color for CMYK color
space in PS.
Color Menu (continued)
The default settings are bold .
Item Value Description