Sharp AR-C200P - Manual (Page 43)

Sharp AR-C200P: Setting up • 43
MP TRAY USAGE
Normal tray; High
priority tray; Feed
when mismatching;
Do not use Specifies MP tray usage.
Normal tray: (Tray select/switch)
Use as a normal tray.
High priority tray: (Valid with Tray
select only). If there is paper in the
MP tray and Duplex is not specified,
the printer uses the MP tray.
Feed when mismatching. When a
paper mismatch occurs (i.e. the
tray's paper size/media type does
not match the print data), a paper
request is issued to the MP Tray. If
the data is for Duplex print, a
specified tray is used instead of the
MP tray.
Do not use. Even if auto switching,
MP Tray will not be used. If MP Tray
is designated in Paper Feed, printer
behaves as though Normal Tray is
selected.
MEDIA CHECK
Enable; Disable Sets whether the printer checks the
matching of paper size to that of the
tray. Only standard sizes are
checked.
TRANSPARENCY
CHECK OHP
Auto; Disable Enable/Disable the transparency
auto detect function.
RESOLUTION
600 dpi x 1200 dpi Selects print resolution.
TONER SAVE
MODE
ON; OFF ON: Enables Toner Save mode.
OFF: Disables Toner Save mode.
MONO-PRINT
SPEED
Auto; color speed;
Normal speed Selects monochrome printing speed.
Auto: prints at the most appropriate
speed for page process.
Color: prints always at the color print
speed.
Normal: Always prints at the
monochrome print speed.
ORIENTATION
Portrait; Landscape Sets page orientation for printing.
LINE PER PAGE
5 to 128. Default = 60. Sets the number of lines that can be
printed on a standard letter-size
page. Invalid in PostScript mode.
Print Menu (continued)
The default settings are bold face.
Item Value Description