Sharp AR-C200P - Manual (Page 63)

Sharp AR-C200P: Setting up • 63
HEX DUMP
EXECUTE Press SELECT to switch the
printer to the Hexadecimal Dump
mode in which all data received is
printed in both Hexadecimal and
ASCII format. To return to normal
print mode, switch the printer off
then on again.
Maintenance Menu
The default settings are bold .
Item Value Description
EEPROM RESET
EXECUTE Initializes EEPROM for each unit.
SAVE MENU
EXECUTE Saves the current menu settings.
RESTORE
EXECUTE Reverts to stored menu settings.
(Only displayed if there are saved
menu settings).
POWER SAVE
ENABLE; DISABLE When no input is received for a
specified time, the printer will enter
Power Save Mode. See also
“Power Save Delay Time” under
the System configuration menu on
page 45.
PAPER BLACK
SETTING
0; +1; +2; –2; –1 Not normally used.
PAPER COLOR
SETTING
0; +1; +2; –2; –1 Not normally used.
TRANSPR BLACK
SETTING
0; +1; +2; –2; –1 Not normally used.
TRANSPR COLOR
SETTING
0; +1; +2; –2; –1 Not normally used.
System Adjust Menu (continued)
The default settings are bold .
Item Value Description