Sharp AR-C200P - Manual (Page 95)

Sharp AR-C200P: Macintosh OS 8.6-9.2.2 Operation • 95
4. Press the SELECT button.
The document will print and be deleted from the hard disk
drive.
To delete a confidential document before printing it
1. Press the MENU button to access the PRINT JOBS MENU
and press the SELECT button.
2. Use the numbered buttons on the control panel to enter the
personal ID number you set above.
3. Press the VALUE button until
ALL JOBS
or the required job
name is displayed.
4. Press the CANCEL button to delete the job from the printer.
Proof and Print
Using Proof and Print
1. Select Proof and Print .
2. Enter a job name of up to 16 characters under Job Name
Setting and a four digit personal ID number.
3. Click Print to proceed with your print job. Print the
document from the software application being used. The
document will be stored on the printer’s hard disk and one
copy will print for your perusal.
NOTES
• The internal hard disk must be installed in the printer and
enabled, to allow for spooling of the print job before final
printing.
• If the hard disk memory is insufficient for the spooled
data, DISK FULL is displayed and only one copy is printed.
• If the software application being used has a collate print
option, it must be turned OFF for proof and print to
operate correctly.
• Proof and print may not be available in some software
applications.