Errors while scanning, Symbology parameter defaults – Symbol Technologies DS6707 User Manual

Page 148

Advertising

10 - 2 DS6707 Digital Imager Scanner Product Reference Guide

Errors While Scanning

Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.

Symbology Parameter Defaults

Table 10-1

lists the defaults for all symbologies parameters. There are two ways to change the default values:

•

Scan the appropriate bar codes in this guide. These new values replace the standard default values in
memory. To recall the default parameter values, scan the

Set Default Parameter on page 4-4

•

Download data through the device’s serial port using SSI. Hexadecimal parameter numbers are shown in
this chapter below the parameter title, and options are shown in parenthesis beneath the accompanying
bar codes. See the Simple Serial Interface (SSI) Programmer’s Guide for detailed instructions for
changing parameters using this method.

NOTE

See

Appendix A, Standard Default Parameters

for all user preferences, hosts, and

miscellaneous default parameters.

Table 10-1

Parameter Defaults

Parameter

Number

Default

Page

Number