Connecting using simple serial interface, Connecting using simple serial interface -2 – Symbol Technologies DS6707 User Manual
Page 84
6 - 2
DS6707 Digital Imager Scanner Product Reference Guide
Connecting Using Simple Serial Interface
Connect the digital imager scanner to an SSI host.
Figure 6-1
SSI Host Connection
1.
Attach the modular connector of the interface cable to the cable interface port on the digital imager scanner
(see
Installing the Interface Cable on page 1-3
).
2.
Connect the other end of the interface cable to the serial port on the host.
3.
Connect the power supply to the serial connector end of the interface cable. Plug the power supply into an
appropriate outlet.
4.
Scan the appropriate baud rate bar code from
that matches the host’s baud rate
setting.
5.
To modify any other parameter options, scan the appropriate bar codes in this chapter.
Interface Cable
Serial Port Connector
to Host
Power Supply Cable