About this guide, Introduction, Configurations – Symbol Technologies DS6707 User Manual
Page 17: Chapter descriptions
About This Guide
The DS6707 Digital Imager Scanner Product Reference Guide provides general instructions for setting up,
operating, maintaining and troubleshooting the DS6707 digital imager scanner.
Configurations
This guide covers the following digital imager scanner configurations:
•
DS6707 Digital Imager Scanner Standard Range: for point of sale scanning
•
DS6707 Digital Imager Scanner Document Capture: for 8 1/2 in. by 11 in. imaging.
Chapter Descriptions
Topics covered in this guide are as follows:
•
Chapter 1, Getting Started
provides a product overview, unpacking instructions, and cable connection
information.
•
Chapter 2, Scanning
describes parts of the digital imager scanner, beeper and LED definitions, and how
to use the digital imager scanner in hand-held and hands-free modes.
•
Chapter 3, Maintenance & Technical Specifications
provides information on how to care for the digital
imager scanner, troubleshooting, and technical specifications.
•
Chapter 4, User Preferences & Miscellaneous Digital Imager Scanner Options
provides commonly used
bar codes to customize how data is transmitted to the host device and programming bar codes for
selecting user preference features for the digital imager scanner.
•
Chapter 5, Imaging Preferences
provides programming bar codes for selecting digital imager scanner
preference features.
•
describes how to set up the digital imager scanner with a Simple Serial Interface
(SSI) host. When using SSI, program the digital imager scanner via bar code menu or SSI host
commands.
•
Chapter 7, USB Interface
describes how to set up the digital imager scanner with a USB host.
•
Chapter 8, RS-232 Interface
describes how to set up the digital imager scanner with an RS-232 host,
such as point-of-sale devices, host computers, or other devices with an available RS-232 port.