Symbol Technologies DS6707 - Manual (Page 70)

5 - 10 DS6707 Digital Imager Scanner Product Reference Guide
Crop to Pixel Addresses
Parameter # F4h, F0h, 3Bh (Top)
Parameter # F4h, F0h, 3Ch (Left)
Parameter # F4h, F0h, 3Dh (Bottom)
Parameter # F4h, F0h, 3Eh (Right)
If Enable Image Cropping is selected, set the pixel addresses from (0,0) to (1279,1023) to crop to.
Columns are numbered from 0 to 1279, rows from 0 to 1023. Specify four values for Top, Left, Bottom, and
Right, where Top and Bottom correspond to row pixel addresses, and Left and Right correspond to column
pixel addresses. For example, for a 4 row x 8 column image in the extreme bottom-right section of the image
set the following values:
Top = 1020, Bottom = 1023, Left = 1272, Right = 1279
To set the crop to pixel address, scan each pixel address bar code below followed by four numeric bar codes
representing the value. Leading zeros are required. For example, to crop the top pixel address to 3, scan 0, 0,
0, 3. See
Appendix D, Numeric Bar Codes for numeric bar codes.
Top Pixel Address
(0 - 1023 Decimal)
Left Pixel Address
(0 - 1279 Decimal)
Bottom Pixel Address
(0 - 1023 Decimal)
Right Pixel Address
(0 - 1279 Decimal)