Sony CDU926S - Manual (Page 9)

Installing the Software Driver
MSCDEX and the device driver for an ordinary SCSI CD-ROM drive can
be used when using the CDU926S as a SCSI CD-ROM drive.
Use the device driver for a CD-R drive when using the CDU926S as a
recordable drive.
Be sure to install the device driver before operating the drive. Refer to the
manual supplied with the host adapter for instructions.
Installing the Software Driver 17
Termination
● If the CD-R drive is connected at the end of the SCSI chain, keep the
drive terminator mounted at the drive.
● If the CD-R drive isn’t the last device at the SCSI bus, remove the
termination from the CD-R drive and make sure that the last device at
the SCSI bus has a proper termination installed.
● Be aware that the SCSI bus needs to be terminated at each end of the
SCSI bus cable.
Closing the Computer
1 Replace the cover on the computer, being careful to reinstall all
screws that were removed.
2 Replace the AC power cord and turn on your computer.
16 Installing the Drive Unit into the Computer