Sony SPK-HCD - Manual (Page 17)

17
This section describes recording from deck A to B.
Dubbing Tapes (from Deck A to B)
1
Press § § § § § to open the cassette compartments,
insert the tapes with the sides to be played
or recorded facing you and close the
cassette compartments.
2
Press HIGH SPEED DUBBING.
The unit enters recording pause mode for high speed
dubbing, the P and r indicators light.
(Dubbing can not be carried out by pressing the
HIGH SPEED DUBBING button.)
Recorded tape Blank tape
DECK A DECK B
HIGH SPEED
DUBBING
1 1
2
3
SYSTEM POWER
n
ON
3
Press P to start dubbing.
The recording pause mode will be canceled and
dubbing starts.
The P indicator goes off.
P
PAUSE
To stop dubbing, press p on deck A or B.
Notes
• The tape in deck B is automatically recorded with the same
recording system as the original tape in deck A. So it is
unnecessary to set DOLBY NR.
• If the sound is affected by a television set during dubbing,
turn off the set or move it away from the unit.
p