Kathrein UFD 170 - Manual (Page 17)

Initial Setup
17
If the turntable is unable to fi nd the desired satellite and the
associated programme, the following message appears:
press

and start satellite search with a different program-
me of the same satellite and check whether there are any
obstructions to the antenna‘s reception.
After a successful search, you can select the factory-preset TV and
radio programmes using the

keys. To change from TV pro-
grammes to radio programmes, press

. Press

to return to the
TV programmes.
For details of how to save additional TV and radio programmes, refer to
the “TV/Radio Programme Lists” section.
When you turn on, the last reception status set is always
activated. Check the time for summer or winter time (see “Local
If the turntable fi nds the desired satellite and the associated
programme, the following message appears:
As soon as the turntable has found the correct satellite, the automatic
fi ne-tuning is carried out. The search lasts a maximum of 90 seconds
(if the signal level is suffi cient, the satellite position is immediately
saved by the turntable). The screen may “freeze” during the fi ne
tuning - this is determined by the system.