Kathrein UFD 170 - Manual (Page 68)

Reset/Park
68
Use the

keys to go to the “Reset/Park” option, and
change the selection to “Reset” using the

keys to go to the “Reset/Park” option, and keys to go to the “Reset/Park” option, and
keys. Now press

The following screen appears:
The antenna is reset, and automatically moves to the park position. A
short message “Antenna reset” appears again. Press

to exit the
menu.
Note: Before replacing individual components of the system (e,g, recei-
ver), the turntable should be moved to park position with “Re ““ set”.
After the “Reset ““ ”, all satellite positions previously saved ”” in the
UFD 170 control unit are deleted. However, the satellite data
in the receiver component of the UFD 170 is retained. in the receiver in the receiver
Press

in the main menu, and then use the

keys to switch to the “HDP antenna setup” option. Then press

to go to the HDP menu.
Reset