Kathrein UFD 170 - Manual (Page 59)

Installation Menu
59
Software and Programme List Update
Due to the digital technology, you can carry out updates of
the software and programme list for your receiver via satellite. The “Software
Download” sub-menu tells you whether new software or programme
lists are available. The only prerequisite is that your satellite receiving
system is aligned with ASTRA 19.2° East.
In the Installation menu, use the

keys to select the
“Software Download” sub-menu and confi rm this with

. Your receiver
automatically searches for the ASTRA transponder, which transmits the
current software and programme list. The following screen appears:
Pressing

in the “Show Info” item gives you information about
the software and programme list being transmitted. The “Show Info”,
“Operating Software” and “Channel List” items are automatically set
to “Yes” if new information and content is available. The left-hand bar
shows the relative signal level.
You can use the cursor keys (

) to deselect an item -
“No”. Items that already inactive cannot be changed. If you only want to
update the software but leave your channel list alone, deselect the
“Channel List” fi eld, or vice versa. You can also request “Info Text”
only.
To update, switch to “Start” and confi rm with

.
If there are no new versions, an on-screen message appears to inform
you of this.
After the “Show Info”
request, you will see
an information screen,
which you can exit
using the

key.