Kathrein UFD 170 - Manual (Page 72)

Turntable Unit Software Download
72
If new software is available for the turntable, you can download it from
the ASTRA system.
Press

to switch to the main menu and then use
the

keys to select the Installation menu. Use
the

keys to select the “Software Download” option, and then
select “HDP 170” using the

keys to select the “Software Download” option, and then keys to select the “Software Download” option, and then
keys. The menu is opened automati-
cally:
The current reception situation is displayed here (satellite,
transponder, frequency, symbol rate, polarisation). Use the

key to select the position, and make your settings with the

 
keys. You can decide whether you want to download the
software from the satellite at the suggested position (marked
with “Yes”) - the saved versions are shown with four digits (0180 in the
illustration) - and whether you want to receive the information text.
If you press

at the “Start” position, the system begins downloading
the software. The entire procedure takes a maximum of an hour.
The download is confi rmed with the following message:
If the vehicle is not jacked up
during the search process, and
people are moving around inside
it, the satellite is likely to be not
found or the signal is likely to be
lost due to the movements of the
vehicle.
Never turn on the ignition during
the download. This could lead
to interference, faults or
malfunctions.