Kathrein UFD 170 - Manual (Page 43)

Adding/Deleting Satellites
43
You can now make entries corresponding to your receiving system
in the relevant positions using the cursor keys (

You can now make entries corresponding to your receiving system You can now make entries corresponding to your receiving system
) and
the number keys. For details of how you can change the satellite
name using the number keys, refer to the “Alphanumeric Assignment
of Remote Control Number Keys” section.
Note: For each point, you can press the

key to view a brief
explanation.
Deleting Satellites
As described under “Setting Up Satellites”, switch to the “LNB
Confi guration” menu. Use the

keys to move the
cursor bar to the satellite you want to delete. Press the

keys to move the keys to move the
or

keys to move the keys to move the
key.
You will now be asked whether you are sure you want to delete the
satellite, and you can either confi rm with

or cancel with

.