Kathrein UFD 170 - Manual (Page 54)

Installation Menu
54
Satellite Search
In the “Satellite Search” menu, you can set the receiver to search for
channels on a satellite of your choice or on all satellites that can be
received.
In this menu, you can use the

keys to call up the
individual menu options and make the settings with the

keys to call up the keys to call up the
keys. The
search is started with

.
You can choose between the following settings:
- Search mode: Free + encrypted, Free only, PREMIERE,
Canal Satélite, CANALSATELLIT, CANAL+,
Stream, TELE+
- Satellite name: All satellites or individual satellites
(e.g. ASTRA, HOTBIRD, ...)
Note: Selecting “Free ““ and encrypted” under the ”” “Search Mode ““ ” menu option
and “All ““ satellites All All ” under the ”” “Satellite ““ Name” menu option gives you ””
the widest variety of channels.
During scanning, the signal quality, the scanning progress and the new
channels found are displayed. At the end, you will see a message to tell
you that the search is complete. To confi rm, press

. All new chan-
nels are added to the existing channel list and highlighted in a different
colour.
Pressing the

key pauses the search, pressing the

key twice
aborts the search.