Kenwood C-V750 - Manual (Page 12)

12
C-V750 (En/T)
2
3
∞
§
¶
™
•
)
¡
(
£ ¢
1
6 5 4 7 8 9 0 ! @ # $ % ^ & *
Note Note
30°
5m
30° 30° 30°
ON/STANDBY
MUTE
VOLUME
ENTER
Confirm Set Up Return
Input
Source Main Menu
TapeA
TapeB
Tape1 LD Tuner CD
VCR2 VCR1 TV Sat. Cable
Setup
DVD/6ch Input
Sound Speaker
C D
Sat.
Tape1
Cable
Reset
VCR1
VCR2
L D
T V
Setup of the Graphical Remote Control (GRC) unit
Controls and indicators
The Graphical Remote Control (GRC) unit provided with the AV CONTROL CENTER can also control KENWOOD cassette decks,
CD player and LD player which are connected to it through system control cords. For details of the controllable functions, refer
to the instruction manuals of these components.
Model: GRC-150
Infrared system
Perform “Model Type
Setup” of the GRC be-
fore using it.
Segment screen
Menu screen Operation keys
Approximate operating range
Remote sensor
Infrared remote control
GRC or RC
Infrared ray system
1. The supplied batteries are intended for use in operation check.
Therefore, their lives may be shorter than ordinary batteries.
2. When the remote-controllable distance gets shorter than
before, replace all four batteries with new ones.
3. Malfunction may occur if direct sunlight or the light of a high-
frequency lighting fluorescent lamp enters the remote sen-
sor. In such a case, change the system installation position to
prevent the malfunction.
4. The GRC display may show erroneous information when the
GRC unit is operated from outside the specified range.
1Segment screen
This area displays the fixed icons.
2Return icon
Select to return to the previous
display.
3Main Menu icon
Select to change the input source
or select Main Menu 2.
4Cable TV icon
Select to control the cable TV.
5Satellite Tuner icon
Select to control the satellite tuner.
6CD icon
Select to control the CD player.
7TV icon
Select to control the TV.
8Tuner icon
Select to control the tuner.
9VCR 1 icon
Select to control VCR 1.
0LD icon
Select to control the LD player.
!VCR 2 icon
Select to control VCR 2.
@Tape 1 icon
Select to control cassette deck 1.
#Tape A icon
Select to control cassette deck A.
$Tape B icon
Select to control cassette deck B.
%Set Up icon
Select to make setup operations.
^Input Source icon
Select to switch the input source.
&Sound icon
Select to control the sound-related
functions.
*Confirm icon
Select to confirm a setting, etc.
(Menu screen
This area displays the
control key icons and
level information.
)Mode display
The above illustration
indicates the Setup
mode.
¡CD icon
Select to set up the
CD player.
™Reset icon
Select to return to the
“Model Type Setup”
menu screen.
£Joystick key
For use in selecting icons.
The joystick moves in 8 direc-
tions.
¢ENTER key
Press to enter a selection.
∞VOLUME (UP) control key
Press to increase the volume
level.
§VOLUME (DOWN) control
key
Press to decrease the volume
level.
¶MUTE key
Press to mute sound temporarily.
• (ON/STANDBY) key
Press to switch the AV CONTROL
CENTER and the components
connected to it through system
control cords between ON and
STANDBY.
Notes Notes
÷ The input source can be selected
using icon 3 or ^.
÷ Icons 4 to $ are used to select the
component to be controlled.