Kenwood C-V750 - Manual (Page 23)

23
C-V750 (En/T)
MODE MUL
MULTI.CONTROL
LEVEL
ENTER
STEREO
ENTER
ENTER
Tone/
Balance
ENTER
ENTER
Sound
Set Up
L ||||||||||
+
|||||||||| R 7
ENTER
MODE MULT
L
MULTI.CONTROL
LEVEL
ENTER
Set Up
ENTER
ENTER
Sound
ENTER
Tone/
Balance
ENTER
ENTER
STEREO
Setup Tone/Balance
Treble
Bass
-8dB
+8dB
L ||||||||||
+
|||||||||| R 7
Sound adjustment functions
Adjusting the tone
1 Select STEREO.
2 Select the BASS or TREBLE adjustment.
To
decrease To
increase To
decrease To
increase
3 Adjust the selected item.
Each press of the MODE key swithes the adjustment item as shown below.
1 BASS :Tone, Bass
2 TREBLE :Tone, Treble
3 L -------- R :Balance
4 SW ch :Subwoofer
5 INPUT :Input level
The adjustment menu appears.
÷ The display on the GRC disappears if no operation has been performed
for about 10 seconds.
÷ The display on the main unit disappears if no operation has been
performed for about 5 seconds.
Display when BASS
is selected The level value changes.
÷ The level can be adjusted between -8 and +8 in steps of 2.
÷ The tone cannot be adjusted when the input selector is set to 6ch
INPUT or the AC-3 indicator is displayed.
÷ If you proceed to this procedure immediately after that for “Adjusting
the tone”, you can use the same menu on the GRC.
Indicates the balance setting
Position of the right
speaker
Indicates the center
Position of the left
speaker
Adjusting the left/right sound balance
1 Select STEREO.
2 Select the Balance adjustment.
3 Adjust the selected item.
To decrease
right
channel
level To decrease
left channel
level
Main unit GRC
Main unit
GRC
Main unit GRC
To decrease
right channel
level To decrease
left channel
level
Each press of the MODE key swithes the adjustment item as shown below.
Main unit
GRC
1 BASS :Tone, Bass
2 TREBLE :Tone, Treble
3 L -------- R :Balance
4 SW ch :Subwoofer
5 INPUT :Input level
dB B A s s - 2
L - - - y t - - R
STEREO DS
STEREO DS
Treble
Bass
-8dB
+8dB