Kenwood C-V750 - Manual (Page 39)

39
C-V750 (En/T)
Input
Source
Surround play of LD or DVD
INPUT selector operation
Main unit GRC
INPUT
Main Menu
ENTER
Main Menu 1
L D
C D
Tuner
Tape1 / MD
Cable / Sat.
VCR
AUX
DVD
÷ *1: The possible selections may be limited depending on the played source and speaker setting.
Surround play of analog input
Surround play of digital input
Dolby mode selection
Each press switches the indication.
DVD-D : DVD Digital LD -D : LD Digital
DVD-A : DVD Analogue LD -A : LD Analogue
(Operation 2)
÷ With (Operation 2), the Digital and Analog can be
switched every time the ENTER key is pressed after
selecting“DVD” or “LD”.
2 Press the ENTER key.
ENTER
1 Select the input source icon.
Each press switches the indication.
ENTER
GRC (Operation 1)
INPUT selector DVD-D LD -D
AC-3 AUDIO INPUT (Rear panel) DIGITAL INPUT DIGITAL INPUT
Input signal Dolby Digital (AC-3) PCM Dolby Digital (AC-3) PCM
Dolby mode *1
(display)
AC-3
(Dolby Digital) 1 PRO LOGIC
2 3 STEROE
(DSP)
1 PRO LOGIC
2 3 STEROE
(DSP)
AC-3
(Dolby Digital)
INPUT selector DVD-A LD -A
CONNECTION (Rear panel) DVD (FRONT L/R) LD (L/R)
Input signal Analogue Analogue
1 PRO LOGIC
2 3 STEROE
(DSP)
Dolby mode *1
(display)
1 VCR
2 AUX
3 TAPE 1 / MD
4 TUNER (frequency display)
5 CD
6 DVD-D
7 DVD-A / 6ch INPUT
8 LD -D
9 LD -A
0 CABLE / SAT 1 VCR
2 AUX
3 TAPE 1 / MD
4 TUNER (frequency display)
5 CD
6 DVD-D
7 DVD-A / 6ch INPUT
8 LD -D
9 LD -A
0 CABLE / SAT