Kenwood C-V750 - Manual (Page 19)

19
C-V750 (En/T)
Convenient functions
One-touch operation and easy operation features
(CD player, cassette deck and LD player)
When the system is in standby mode, the operations as de-
scribed below are possible provided that the associated compo-
nents are connected through system control cords.
Function available with the eject key op-
eration
÷ The clock information is displayed in standby mode.
÷ This operation is not available from the eject key of a double cassette
deck.
1 Ensure that system control cords are connected.
2 Set the power switch of the cassette deck and LD player to
the ON position.
3 Set the power switch of the power amplifier to the ON
position.
4 Load the source component with the software to be played.
5 Press the (ON/STANDBY) key of the AV CONTROL
CENTER to put it to standby mode.
Preparations
1 Press the play key.
2 The system is switched from standby mode to ON mode.
3 The input selector is switched automatically.
4 Playback starts.
Function available with the play key op-
eration
1 Press the eject key.
2 The system is switched from standby mode to ON mode.
3 The tray panel of the source component opens.
÷ CD player and cassette deck
Operation available by switching the input
selector
÷ This operation is available when the CD, TAPE 1 or LD input is selected. 1 Select the desired input with the input selector.
2 The selected source component starts to play.
÷ CD player and cassette deck
÷ Turn on the system before switching the input selector.
÷ Use the main unit keys for operation.