Kodak Ektagraphic III PAINTED and NON-PAINTED PROJECTORS J-E PLUS - Manual (Page 16)

SERVICE MANUAL
16 30APR96 – SM4530-1
[12] Remove the LIGHT BAFFLE.
[13] Remove the NUT from the LIFT LEVER SHAFT.
[14] Remove the LIFT LEVER and SHAFT.
[15] Remove the 2 E-RINGS from the 2 CAM SHAFT BEARINGS.
[16] Remove the 2 CAM SHAFT BEARINGS.
[17] Press and hold the SELECT LEVER down.
[18] Remove the CAM STACK ASSEMBLY.
[19] Disconnect the SELECT LEVER SPRING from the TAB and remove the SELECT LEVER.
A008_0174HA
A008_0174HCA
SELECT LEVER
SPRING
LEVER
SELECT
TAB
CAM STACK ASSEMBLY
NUT
E-RING
BEARING
LIFT LEVER
LIFT LEVER
SHAFT
E-RING
BEARING