Kodak Ektagraphic III PAINTED and NON-PAINTED PROJECTORS J-E PLUS - Manual (Page 19)

Replacements and Installations
SM4530-1 – 30APR96 19
Replacing the LAMP SOCKET TERMINAL ASSEMBLY, Painted Models
[1] Disconnect the main power.
[2] Remove:
• LAMP MODULE
• PROJECTION LAMP for the LAMP MODULE from the LAMP MODULE
• SCREW and lift the CONDENSER LENS HOLDER up
• CONDENSER LENS and HEAT GLASS
• RETAINING RING
• SPRING WASHER
• SOCKET PIN
A008_0171DA
A008_0171DCA
LAMP SOCKET
TOP PLATE
BRACKET
LAMP
HEAT GLASS
LENS
CONDENSER
HOLDER
CONDENSER
EJECTOR
LAMP
6 TABS
SCREW
LAMP
PROJECTOR
SOCKET PIN
WASHER
SPRING
E-RING