Kodak Ektagraphic III PAINTED and NON-PAINTED PROJECTORS J-E PLUS - Manual (Page 41)

Specifications
SM4530-1 – 30APR96 41
Section 5: Specifications
Item Description
Electrical Supply Standard U.S. Models: 110 - 125 V ac
Japan J Models: 100 V AC, 60 Hz only
Korea KK Models: 220 V AC, 60 Hz only
Power Consumption 400 W
Dimensions • Height: 119 mm (4.69 in.) without TRAY
• Width: 238 mm (12.93 in.)
• Length: 295 mm (11.6 in.)
Slide size 35 mm, 50 x 50 mm (2 x 2 in.)
Slide change time 1 second
Lamp
(in LO position) • EXR 82 V, 300 W, 35 hours average life
• EXW 82 V, 300 W, 15 hours average lamp life
• FHS 82 V, 300 W, 70 hours average life
• EXY 82 V, 300 W, 200 hours average life
Lumen Output • 900 minimum with EXR lamp
• Lowest corner to center ratio is 55% minimum
• Test method:
– Ektagraphic
– 102 mm, F/2.8 LENS aperture (24 x 36 mm), compatible
with European specification DIN 19027
Operating temperature • 4.5 C (40 F), 15% humidity in low
• 49 C (120 F), 15% humidity in high
• 21 - 27 C (70 - 80 F), 20 - 60% humidity optimum
Cooling Fan speed is 2780 or 3000 RPMs, 1360 BTUs per hour to cool
projector
Approvals UL
Environmental storage Complies with storage test specifications (TS 172)
Environmental operation Complies with climactic test specifications (TS 218)
Safety • 3 GROUNDED POWER CORDS, detachable
• Heat sensitive interrupt fuses
• 109 C power to motor (lamp fuse)
• 171 C MOTOR
Dielectric strength Apply 1200 V AC, 60 Hz for 1 second; maximum leakage
current is 2.5 mA.
Automatic Timer Operates between the following times:
• Fast = 3 1 second
• Slow = 22 6 seconds
Elevation 14 maximum front elevation assembly.