Kyocera KX444 - Manual (Page 13)

User Guide for the Kyocera KX444 Phone 7
PTT call types
You can make two types of walkie-talkie calls:
• A
barge call automatically connects to the
other party. The receiving party does not have
the option to ignore the call.
• An alert call sends the receiving party a tone
indicating that someone wants to speak with
them. The call recipient has the option to either
answer or ignore the call.
Making a PTT barge call to a
saved contact
If you have saved a phone number in your PTT
contacts list (at
http://www.vzwpushtotalk.com ) or
in your phone’s contacts list, you can find it quickly.
Start at the home screen.
1. Press the PTT button.
-or-
Select
Menu
→
Push to Talk.
-or-
Select
Menu
→
Contacts
→
View All.
2. Scroll through the list and highlight the
contact you want to call.
3. Press the PTT button. Listen for the “OK to
Talk” tone. The message “Connected to” then
“Talking to” appears on the phone screen.
Note: If the contact is unavailable, a message
appears on your phone screen.
4. Speak while pressing the PTT button.
5. Release the PTT button when finished
speaking. This allows the called party to reply.
6. Wait for the “Floor Available” tone, then press
the PTT button again to speak.
7. To end the PTT call, press . If the other
party ends the call, no action is required.
“Call Ended” appears.
Making a PTT barge call to an
unsaved phone number
Start at the home screen.
1. Enter the phone number.
2. Press and hold the PTT button. Listen for the
“OK to Talk” tone. The message “Connected
to” then “Talking to” appears on the phone
screen.
Note: If the other party’s phone is unavailable,
a message appears on your phone screen.
3. Speak while pressing the PTT button.
4. Release the PTT button when finished
speaking. This allows the other party to reply.
5. Wait for the “Floor Available” tone, then press
the PTT button again to speak.
6. To end the PTT call, press . If the other
party ends the call, no action is required.
“Call Ended” appears.