Kyocera KX444 - Manual (Page 47)

User Guide for the Kyocera KX444 Phone 41
Setting alerts for your headset
When a headset (sold separately) is attached to
the phone, you can set alert sounds to originate
from the headset.
1. Select Menu
→
Settings
→
Accessories
→
Headset Ring .
2. Select Out of headset to have alerts originate
from the headset.
Network settings
Switching between phone lines
Your phone can have two service accounts, or
phone lines, associated with it. Each phone line
has its own phone number. When you are using
one line, you cannot receive calls from the other.
It would be as if the phone were “off” for that
number. Your voicemail, however, will still take
messages. All contacts and settings are shared for
both lines.
Note: Before you can switch between phone lines,
you must first establish a second phone line with
Verizon Wireless. Once it has been established, a
second phone number becomes available in the
menu for selection.
1. Select Menu
→
Settings
→
Network
→
Set Phone Line .
2. Select the other line and press .
Data settings
Setting Com port speed
The Com Speed sets the data rate at which your
phone connects to a laptop or PC, or at which it
sends and receives over-the-air text messages.
1. Select Menu
→
Settings
→
Accessories
→
Com Speed .
2. Select the speed. The options are: 19.2 kbps ,
115.2 kbps (default), 230.4 kbps .
Note: There may be a higher charge for making
calls using high-speed data in areas where 1X
service is available.
Setting the phone to receive data
or faxes
Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. (Note that this does not apply to PTT
calls.) To receive data or faxes, you must connect
the phone to a laptop or PC and switch the phone
from voice mode to data/fax mode.
1. Connect the phone to the laptop or PC.
2. Set the Com Speed.
3. Select Menu
→
Settings
→
Network
→
Data/Fax Calls .