Kyocera KX444 - Manual (Page 21)

User Guide for the Kyocera KX444 Phone 15
Checking voicemail messages
When a voice message is received, your screen
will display a notification: “New Message [x]
Voicemail.” This text will remain for about five
minutes. After that, look for the
symbol at the
top of your screen. The symbol flashes if the
message is urgent.
If you see “New Message” on your screen
1. Press to select Call . This initiates a call to
your voicemail number.
2. Press to interrupt the notification.
3. Follow the prompts to retrieve the message.
If you see the symbol
1. Press to initiate a call to your
voicemail number.
2. Follow the prompts to retrieve the message.
Note: You can set the phone to beep, light up, or
play a tune every five minutes to remind you that
you have voicemail.
Locking the keypad
The Keyguard locks your keypad and side buttons
on your phone to prevent accidental keypresses
when the phone is turned on and a call is not in
progress. You can still answer or silence an
incoming call.
• To lock the keypad, select
Menu
→
Settings
→
Keyguard
→
Guard now .
• To unlock the keypad, press
in this order.
Changing the keyguard setting
1. Select Menu
→
Settings
→
Keyguard .
2. Highlight an option. You can set the phone to
lock the keypad immediately, or automatically
if no key is pressed after 30 seconds,
1 minute, or 5 minutes.
3. Press to save.
Tracking calls
You can track the number and duration of calls
made and received on your phone.
1. Select Menu
→
Settings
→
Call Information.
2. Select a timer:
–
Recent Calls —Tracks all calls made and
received by your phone since this timer
was last reset. To reset this timer, highlight
Reset and press .
– All Calls Timer —Tracks all calls made and
received by your phone. This timer cannot
be reset.
– Kbyte Counter —Tracks the kilobytes of
data sent and received by your phone. It
counts only SO 33 packet data. When the
total reaches 999,999kb, the counters
reset automatically. To reset this counter
manually, highlight
Reset and press .