Installing the battery, Charging the battery, Caring for the battery – Kyocera KX444 User Manual

Page 7: Etting, Tarted

Advertising
background image

User Guide for the Kyocera KX444 Phone

1

1

G

ETTING

S

TARTED

Your phone comes with a removable lithium ion
(LiIon) battery.

Fully charge the battery before

using the phone.

Installing the battery

1.

Hold the phone facing
away from you.

2.

Use your fingernail to
pull the circular latch
toward the bottom of
the phone and pull the
battery door away.

3.

Place the battery in
the phone casing
with the metal
contacts toward the
top of the phone.

4.

Place the battery door notches in the openings
near the bottom of the phone.

5.

Press the circular latch
until it clicks.

Charging the battery

You must have at least a partial charge

in the

battery to make or receive calls.
To charge the battery, connect
the AC adapter to the jack on
the lower right side of the
phone, then plug the adapter
into a wall outlet.
The battery icon in the upper-right corner of the
screen tells you whether the phone is:
• Charging (the icon is animated)
• Partially charged
• Fully charged

Recharging the battery:

You can safely recharge the

battery at any time, even if it has a partial charge.

Caring for the battery

General safety guidelines

• Do not take apart, puncture, or short-circuit

the battery.

• If you have not used the battery for more than

a month, recharge it before using your phone.

• Avoid exposing the battery to extreme

temperatures, direct sunlight, or high
humidity.

• Never dispose of any battery in or near a fire.

It could explode.

Advertising