Kyocera KX444 - Manual (Page 22)

16 Making and Answering Calls
Timing your calls
You can set your phone to beep 10 seconds
before each minute passes when you are on a call.
• Select
Menu
→
Settings
→
Sounds
→
Minute Alert
→
Enabled .
Receiving data or faxes
Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. You cannot receive voice calls while
the phone is in data/fax mode. For more
information, see “Data settings” on page 41.
Setting roaming alerts and
ringers
Setting an alert for roaming
You may use this setting if you want the phone to
alert you when you roam outside of your home
service area.
1. Select Menu
→
Settings
→
Network
→
Roam/Svc Alert .
2. Select an option and press .
– When no svc alerts you with three tones
decreasing in pitch when service is lost
and three tones increasing in pitch when
service is acquired again.
– Roam Change alerts you with two
decreasing tones when roaming service is
acquired and three increasing tones when
home area service is acquired again.
– Any Change alerts you with three
increasing tones if there is a change in
roaming service or three decreasing tones
if the phone loses service.
Setting the roam ringer
You can set a ringer to indicate when an incoming
call will be subject to roaming charges.
1. Select Menu
→
Settings
→
Sounds
→
Roam Ringer .
2. Highlight Enabled and press . You’ll hear
a sample of the ringer.
3. Press to set the ringer.
Setting Call Guard to avoid roaming
calls
You can set your phone to warn you before you
answer or place a call while roaming.
• Select
Menu
→
Settings
→
Convenience
→
Call Guard
→
Call prompt .
The phone makes a distinctive ring to indicate an
incoming call while you are roaming, and you
must press
to accept the call or to place a
call while roaming.