Kensington MP-15E - Manual (Page 17)

17
How to Install the Projector
■ Projection Distance and Screen Size
Use the following diagrams to determine the screen display size and the type of screen
required for any given projector location.
• The projection distance that provides good focusing is 1.15 m(1.2 yd) to 10 m(11 yd) from
the front of the lens. Install the projector within this range.
CAUTION
Installation location
• Do not install the projector at excessively hot or cold locations. The ambient temperature should be within 0°C to
35°C (32°F to 95°F).
• Position the projector so that the screen does not directly receive sunlight or other light from other lighting.
Otherwise, the screen becomes white and is difficult to view.
In a bright room, use a curtain or other means to darken the area around the screen.
• Do not install the projector where it will be subject to excessive humidity, dust, or cigarette smoke.
Otherwise, image quality may deteriorate as dirt builds up on the lens, mirrors and other optical components.
• Do not install the projector in a small room with poor air circulation or any place where the air vents may be
blocked. Temperature build-up inside the projector may result in fire or a failure. (Vents are located at the front,
right and bottom of the projector.)
Horizontal
Dimension
Ve
rtical
Dimension
Screen Size
508 x 381
610 x 457
406 x 305
305 x 229
203 x 152
102 x 76
(cm)
250
300
200
150
100
50
0
(inch) Width x Height
(screen size)
Screen Siz
e
Projection Distance
Projection Distance
(1.15 m to 10 m/1.2 yd to 11 yd)
Wide
Tele
2 4 6 8 10 12 (m)