Kensington MP-15E - Manual (Page 31)

31
Basic Operation
Document Orientation and Pickup Size
Place the document or printed matter face down at the orientation shown in the figure below.
The maximum size that documents or printed matter can be picked up is 216 mm/8.5 in
(vertical) and 288 mm/11.3 in (horizontal). For this reason, the projected sizes are as follows
when an A4-size sheet of paper is placed at the respective orientations. (Shaded section is the
projected area.)
ABC
abc
When placing A4-size paper vertically, the
screen can be effectively used by enlarging
the zooming ratio. Parts protruding outside the pickup area are
not projected on the screen. To project these
parts, move the paper.
297 mm/11.6 in (paper size)
288 mm/11.3 in (pickup size)
210 mm/8.3 in (paper size) 216 mm/8.5 in (pickup size)
A4 horizontal orientation
288 mm/11.3 in (pickup size)
210 mm/8.3 in (paper size)
216 mm/8.5 in (pickup size) 297 mm/11.6 in (paper size)
A4 vertical orientation
Attaching the Positioning Plate
Attach the positioning plate in the direction shown below.
Documents can be easily centered by aligning them with the positioning plate when placing
them on the pickup section.