Kensington MP-15E - Manual (Page 51)

2
Thank you for purchasing the MP-15E Multi Projector.
Before operating your projector, please read this manual carefully.
● Features
• 5 in 1: The MP-15E offers five display functions from one machine.
1. Documents : Directly project documents, catalogs and other printed
materials
2. OHP : Selecting the OHP functions allow for direct viewing of
transparencies, slides and other printed materials
3. PC : Connect and display from your PC, Macintosh or other RGB
equipment
4. Video : Display images from VCRs, DVD and video cameras for
enhanced multimedia presentations
5. 3D Objects : Project 3D objects such as circuit boards, coins, lab objects
• Ease of operation
Easily switch between projecting printed materials to data or video images with a
press of a button.
• Total cost of ownership
With direct access to the OHP, special transparencies are not required saving
you time and expense.
• Superb reproduction
The MP-15E integrates a high-resolution single plate color CCD camera with 2
million pixels. This provides for realistic and sharp original color reproduction.
• Image enlargement
With Zoom capabilities, fine text and other material can be easily enlarged
without moving the projector.
• Image interpolation
With native XGA resolution, the MP-15E is adept at projecting non-native
sources up to SXGA and to VGA resolutions.
● About Trademarks
IBM is a registered trademark of IBM Corporation.
Macintosh and Power Book are trademarks of Apple Computer Inc.
Windows is a trademark of U.S. Microsoft Corporation.
This label is located on the back of the remote control.
Do not look into the laser pointer while it is on
and do not point the laser beam at another
person. Serious injury could result.
51
Mode Name
Type
LCD Panel Size
Drive System
Number of Pixels
Arrangement
Projection Lens
Optical Source
Display Size
Color Reproducibility
Brightness
Scan Frequency
Maximum Resolution (at RGB signal input)
OHP Pickup unit
(actual Pickup speed
object Pickup size
projection
section)
PC Signal system
(Analog Video signal
RGB Input) Sync Signal
Input/Output Terminals
Connection Cable
Video Signal system
Input Terminal
Monitor Video signal
Output Sync Signal
Output Terminal
PC, Audio Signal
Video Input Terminal
Monitor Audio Signal
Output Output Terminal
Audio Output
Operating Range of Temperature and Humidity
Power Source
Power Consumption
External Dimensions (mm/in)
Weight
Accessories
MP-15E
3 primary Color LCD Shutter Projection Type
0.9 inches x 3 Panels, Aspect Ratio 4:3
Poly Silicon TFT Active Matrix
786,432 pixels (1,024 x 768 dots) x 3
Stripe
Manual Zoom: 1 to 1.2x, f=36 mm to 43.2 mm, F2.2 to 2.6
150 W
25 inches to 252 inches (projection distance 1.15 to 10 m)
Full color (16,770,000 colors)
1100 ANSI lumens (at normally white)
Horizontal 15 to 80 kHz, Vertical 50 to 75 Hz
1,024 x 768 dots (Compressed display of 1,280 x 1,024 dots is possible.)
1/2 inch CCD camera (2 million pixels)
4 frames/sec
At 1x: 288 mm x 216 mm (11.3 in x 8.5 in),
At 2x: 144 x 108 mm (5.7 in x 4.2 in)
Separate Signal System
Analog: 0.7Vp-p/75
Ω
Separate/composite: TTL Level (positive/negative)
15 pin Mini D-sub 1 ch
Various cables for Macintosh, VGA (cables other than for VGA are sold
separately)
NTSC/PAL/SECAM
RCA Pin Terminal 1 ch, S terminal 1 ch (Mini DIN4-pin) x 1
0.7Vp-p/75 Ω
Separate TTL Level, Minus Polarity
15 pin Mini D-sub 1 ch
0.4Vrms/47K
Ω
RCA Pin Jack
0.4Vrms/47K
Ω 1
Stereo Mini Jack
1.5 W x 2 stereo
Temperature: 0 to 35˚C (32 to 95˚F), humidity: 20 to 80% (no condensation)
100-120/220-240V AC 50/60 Hz
250 W (during standby: approx. 7 W)
298 (W) x 398 (D) x 189.5 (H) /11.7 (W) x 15.6 (D) x 7.4 (H) (including document cover)
5.4 kg (12 lb) (including document cover)
Power Cord (3 m/3.3 yd), Remote Control, Positioning Plate, User's Manual,
Battery (AAA x 2), MPC-VGA Cable
Specifications
Main Part
Specification
Video Input/Output
Audio input
1 : Input signals, which are synchronized with the selected screen, are provided for output.
• Specifications and designs are subject to change without prior notice in order to improve the product.