Kyocera X-tc M2000 - Manual (Page 18)

10 Power Phone Up
2 Call Features
This section describes the basic features related
to calls.
Power Phone Up
• To turn your phone on, press the båÇ key and
wait until the phone display lights up.
• To turn your phone off, press and hold the
båÇ key until the phone plays a musical
chime and turns off.
Make Phone Calls
Make sure you are in an area where a signal can
be received. Look for the signal strength icon on
the main screen. The more bars, the stronger the
signal. If there are no bars, move to where the
signal strength is better.
When the phone has been idle for a time, it
changes to power save mode. Press any key to
return to normal operating mode.
There are several ways you can make a phone
call.
Call Using a Number
1. Enter a phone number.
2. Press the pÉåÇ key.
Call Using a Contact
1. From cáåÇ=е~гЙ , highlight a contact.
2. Press the pÉåÇ key.
Call Using Voice Commands
You can use voice commands to call a contact
from your voice dial list or to dial a phone
number. For more information, see “Voice
Commands” on page 69.
Redial a Number
1. Press the pÉåÇ key once to open your call
history.
2. Highlight a phone number or contact and
press the
pÉåÇ key.
kçíÉW= To redial the last number called, received
or missed, press the pÉåÇ key three times.
Answer Phone Calls
When a call comes in, the phone rings, vibrates,
or lights up. The phone number of the caller also
appears if it is not restricted. If the number is
stored in your contacts list, the contact’s name
appears. There are several ways you can answer a
phone call.
Answer Using Earpiece
Press the pÉåÇ key.
Answer Using Speakerphone
Press the pйЙ~вЙкйЬзеЙ key.