Kyocera X-tc M2000 - Manual (Page 19)

User Guide 11
Answer Using Slide
You can set the phone to instantly answer an
incoming call when you slide the phone open. For
more information, see “Enable Open to Answer”
on page 65.
End Phone Calls
Press the båÇ key.
Activate Voice Dialing
1. Press and hold the pÉåÇ key.
2. Follow the prompts.
For more information, see “Voice Commands” on
page 69.
Volume Control
Adjust Volume during a Call
Press the sçäìãÉ key up or down to adjust the
earpiece volume during a call.
Use the Speakerphone
Your phone has a built-in speakerphone.
• To turn on the speakerphone, press the
pйЙ~вЙкйЬзеЙ key. The speakerphone icon
appears on the main screen when the
speakerphone is on.
• To turn off the speakerphone, press the
pйЙ~вЙкйЬзеЙ key again.
kçíÉW= If you press the pйЙ~вЙкйЬзеЙ key during
an incoming call, you will answer the call.
Silence an Incoming Call
• To silence the phone without answering the
call, press the _~Åâ key or press the sçäìãÉ
key up or down.
• To silence the phone and answer the call,
press the _~Åâ key or press the sçäìãÉ key
up or down and then press the pÉåÇ key.
Use Speed Dialing
Speed dialing allows you to assign a one- or
two-digit shortcut to a contact. Before you can use
speed dialing you must save a phone number as a
contact and assign a speed dial location to it. See
“Assign Speed Dials to Contacts” on page 29.
To call a contact that has a speed dial location.
1.
Enter the one- or two-digit speed dial
location.
2. Press the pÉåÇ key.
Emergency Services
Call Emergency Service
You can call an emergency code even if your
phone is locked or your account is restricted.
When you call, your phone enters emergency
mode. This enables the emergency service
exclusive access to your phone to call you back, if
necessary. To make or receive regular calls after
dialing the code, you must exit this mode.
To dial an emergency code:
1.
Enter your 3-digit emergency code.