Kyocera X-tc M2000 - Manual (Page 71)

User Guide 63
1. From eçäÇ=Е~дд , select bе~ДдЙЗ .
If you have not recorded a hold message, you
need to record one, such as “Please hold. I’ll
answer in a minute.”
2. Record the message twice, as prompted.
3. Select p~îÉ or léíáçåë and one of the
following:
–
mд~у to replay your message.
– oÉJêÉÅçêÇ to record your message
again.
– bñáí to exit.
The next time a call comes in, you can place it on
hold.
Place a Call on Hold
You can place a call on hold with
eçäÇ=Е~дд
enabled.
kçíÉW= If you are already on a call and you receive
another call, you cannot place the incoming call
on hold. With no call waiting enabled, the call
goes to
sçáÅÉã~áä .
When a call comes in, do the following:
1.
Select léíáçåë=[=eçäÇ=Е~дд to place the
caller on hold with your recorded hold
message.
2. Select ^елпЙк to speak to the caller on hold
or bеЗ=`~дд to hang up without speaking.
Change Hold Call Message
1.
From eçäÇ=Е~дд , select oÉJêÉÅçêÇ=ãëÖ .
2. Record the message twice, as prompted.
3. Select p~îÉ to save the message or léíáçåë
and one of the following:
–
mд~у to replay your message.
– oÉJêÉÅçêÇ to record your message
again.
– bñáí to exit.
Use 1-Touch Dialing
The 1-Touch Dialing feature is the fastest way to
call a speed dial location. To call a contact with
speed dial, press and hold the speed dialing
location.
If it is a two-digit location, press the first digit
briefly, then press and hold the second digit.
kçíÉW= To use 1-Touch dialing, you must enable
1-Touch dialing on your phone and have a speed
dial location assigned to a contact.
From
NJqçìÅÜ=Зб~дбеЦ , select bе~ДдЙЗ to turn
on 1-touch dialing.
Customize Keys
You can modify the k~обЦ~нбзе key settings to set
up your desired shortcut.
1.
From `млнзгбтЙ=вЙул , select iÉÑí=е~о=вЙу ,
oáÖÜí=е~о=вЙу , or açïå=е~о=вЙу .
2. Select your desired menu option for the
targeted key shortcut.