Kyocera X-tc M2000 - Manual (Page 62)

54 Tools
kçíÉW= You cannot recover deleted information.
Scheduler Settings
Set Scheduler Hours
1.
From pÉííáåÖë , select `~дЙеЗ~к=Ьзмкл .
2. Modify the start and end times.
– Scroll left or right to move between hour,
minute, and AM/PM fields.
– Scroll up or down to change hour,
minute, and AM/PM.
3. Select p~îÉ when done.
Erase Events Automatically
1.
From pÉííáåÖë , select ^мнз=Йк~лЙ .
2. Select an option from the list to set when to
automatically erase your past events.
Set Event Priority
1.
From pÉííáåÖë , select mêáçêáíó .
2. Select an option to set every event you create
with this priority type.
Set Event Reminder
1.
From pÉííáåÖë , select oÉãáåÇÉê .
2. Select an option to set every event you create
with this reminder setting.
Set Event Reminder Alert
1.
From pÉííáåÖë , select oÉãáåÇÉê=лзмеЗ .
2. Select an option to set every event you create
with this reminder alert. (Scroll to listen to
sounds).
Set Event Silent Mode
1.
From pÉííáåÖë , select páäÉåí=гзЗЙ .
2. Select an option to set every event you create
with this silent mode.
Alarm clock
You can set up to four alerts with your phone’s
three alarm clocks and one quick alarm.
kçíÉW= The alert occurs only if the phone is on.
Set an Alarm
1.
From ^д~кг=ЕдзЕв , scroll to one of the
alarms and select pÉí .
2. Press the lh key to change the time, if
needed.
– Scroll left or right to move between hour,
minute and AM/PM fields.
– Scroll up or down to change hour,
minute and AM/PM.
Press the lh key to save time and move to
the next field.
3. Press the lh key to select a sound from the
list.
4. Press the lh key to select a recurring alarm
from the list, if needed.
5. Press the lh key to enter a note.
6. Select p~îÉ .
When the alarm rings, select píçé to turn off the
alarm or påççòÉ to reset the alarm for next ten
minutes.