Programming flash, Ready, Remote management active – Konftel G510-7276-00 User Manual
Page 101: Remove paper from standard output bin, Remove packaging material, Replace <color> cartridge, Tray <x> empty, Tray <x> low, Tray <x> missing, Unsupported usb device, please remove
Programming Flash
Fonts and macros are being written to flash. Wait for the message to clear.
Ready
The printer is ready to print.
Reload printed pages in Tray <x>
•
Press
to clear the message and continue processing the second side of the sheet.
•
Press
, and then press
to cancel printing.
Remote Management Active
The printer is offline while it configures settings. Wait for the message to clear.
Remove paper from standard output bin
Try one or more of the following:
•
Remove paper from the standard exit bin to clear the message and continue printing.
•
Press
to clear the message and continue printing.
Remove packaging material
Check for and remove any packaging materials from the toner cartridges.
Replace <color> cartridge
Replace the toner cartridge, and then press
to clear the message and continue printing.
Tray <x> Empty
Try one or more of the following:
•
Load the paper tray or other source with the correct paper type and size.
•
Press
, and then press
to cancel the current job.
Tray <x> Low
Load the paper tray or other source with the correct paper type and size.
Tray <x> Missing
Insert the specified tray into the printer.
Unsupported USB device, please remove
Remove the unrecognized USB device.
Understanding printer messages
99