Energy star, Laser notice, Laser advisory label – Konftel G510-7276-00 User Manual
Page 161: Power consumption, Product power consumption
ENERGY STAR
Applicable only to models with a duplex unit installed.
Laser notice
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR Subchapter J for Class I (1) laser
products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1.
Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is
a maximum 15 milliwatt gallium arsenide laser operating in the wavelength of 770-795 nanometers. The laser system
and printer are designed so there is never any human access to laser radiation above a Class I level during normal
operation, user maintenance, or prescribed service condition.
Laser advisory label
A laser notice label may be affixed to this printer as shown:
Power consumption
Product power consumption
The following table documents the power consumption characteristics of the product.
Note: Some modes may not apply to your product.
Mode
Description
Power consumption (Watts)
Printing
The product is generating hard-copy output from electronic inputs.
480 W; 500 W
Copying
The product is generating hard-copy output from hard-copy original
documents.
N/A
Scanning
The product is scanning hard-copy documents.
N/A
Ready
The product is waiting for a print job.
34 W; 36 W
Power Saver The product is in energy-saving mode.
<18 W; <16 W
Off
The product is plugged into a wall outlet, but the power switch is turned
off.
.25 W
Notices
159