Konftel G510-7276-00 - Manual (Page 86)

Menu item Description
Timeouts
Print Timeout
Disabled
1–255
Sets the amount of time in seconds the printer waits to receive an
end-of-job message before canceling the remainder of the print
job
Notes:
• 90 seconds is the factory default setting.
• When the timer expires, any partially printed page still in the
printer is printed, and then the printer checks to see if any
new print jobs are waiting.
• Print Timeout is available only when using PCL or PPDS
emulation. This setting has no effect on PostScript emulation
print jobs.
Timeouts
Wait Timeout
Disabled
15–65535
Sets the amount of time in seconds the printer waits for additional
data before canceling a print job
Notes:
• 40 seconds is the factory default setting.
• Wait Timeout is available only when the printer is using
PostScript emulation. This setting has no effect on PCL or
PPDS emulation print jobs.
Factory Defaults
Do Not Restore
Restore
Returns the printer settings to the factory default settings
Notes:
• Do Not Restore is the factory default setting. Do Not Restore
keeps the user-defined settings.
• Restore returns all printer settings to the factory default
settings except Network/Ports menu settings. All downloads
stored in RAM are deleted. Downloads stored in flash memory
or on a printer hard disk are not affected.
Setup menu
Menu item Description
Printer Language
PS Emulation
PCL Emulation
PPDS Emulation
Determines which printer language the print server uses to send data to the
printer
Note: PS Emulation is the factory default setting.
Print Area
Normal
Fit to Page
Whole Page
Sets the print area
Note: Normal is the factory default setting.
Download Target
RAM
Flash
Collects permanent resources that have been downloaded on the printer and
automatically writes them to the flash drive
Note: RAM is the factory default setting.
Understanding printer menus
84