Konftel G510-7276-00 - Manual (Page 22)

6 Reinstall the system board access cover.
Installing a flash memory card
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory
devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the
wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well,
and unplug any cables going into the printer.
1 Access the system board.
2 Unpack the memory card.
Note: Avoid touching the connection points along the edge of the card.
Additional printer setup
20