Kyocera COMMAND CENTER Multifunctional Printer - Manual (Page 29)

COMMAND CENTER Pages
Operation Guide 25
1.
Click Import Contacts or Import Groups.
2.
The address book opens. Put a check mark in the check box for the address or group
you want to add to the destinations.
3.
After you have finished selection, click Submit.
4.
The Action Settings > Forward page appears. Check that the Destination is added to
the Destination List.
Deletion
You can delete a Destination from the Destination List.
Open the Action Settings > Forward page.
1.
Put a check mark in the check box for the destination you want to delete from the
Destination List.
2.
After you have finished selection, click Delete.
The Action Settings > Forward - Delete page appears. You can confirm the
destinations to be deleted.
3.
Click Delete when the desired destinations are selected.
4.
The Action Settings > Forward page appears. Check that the Destination is deleted
from the Destination List.
After confirming the settings, click Submit.
FAX / i-FAX > FAX > Defaults
The table below provides a summary of the items displayed on the FAX / i-FAX > FAX >
Defaults page.
Item Description
Local FAX
Number Specifies your FAX system number.
FAX Line Sets the type of phone line to correspond to the type of
telephone service that you are using. Be sure that the type of
phone line you select is correct because, if the setting is
incorrect, dialing will be impossible. The choices are Tone
(DTMF) or Pulse (10pps), or Pulse (20pps).
Local FAX ID Specifies your FAX system ID.
Speaker
Volume Sets the volume of the internal speaker that allows you to
listen to conditions on the telephone line when the [On-
Hook] key was pressed. The choices are Off and levels 1, 2
or 3.
Monitor Volume Sets the volume of the internal speaker that allows you to
listen to conditions on the telephone line when the [On-
Hook] key was not pressed. The choices are Off and levels
1, 2 or 3.