Kyocera COMMAND CENTER Multifunctional Printer - Manual (Page 51)

COMMAND CENTER Pages
Operation Guide 47
Advanced > Security > IPSec > General
This page allows you to set access restrictions for IPSec protocol-based communication.
Authentication
Type Selects either EAP-TLS or PEAP (EAP-MS-CHAPv2) for the
authentication type.
Login User
Name Enter the name of the user who accesses the printing
system. The IEEE802.1x client certificate of this user must
be valid.
Login Password You can set a PEAP-based password. (This setting is valid
when PEAP (EAP-MS-CHAPv2) authentication type is
selected.)
Common Name Specifies the common name of the server certificate if the
server is required to be authenticated. (This setting is valid
when PEAP (EAP-MS-CHAPv2) authentication type is
selected.)
Match Rule of
Common Name When the server certificate is verified, the common name
specified under Common Name is compared with the
common name on the server certificate. This item allows you
to specify whether the common names are considered to be
matched if they exactly or partially match. (This setting is valid
when PEAP (EAP-MS-CHAPv2) authentication type is
selected.)
Certificate
Status Displays whether the certificate is valid or not.
Item Description
Item Description
IPSec Specifies whether or not to enable the IPSec protocol. Select
On to enable the IPSec protocol. Select Off to disable it.
Restriction Specifies the default policy for non-IPSec packets.
Select Allow to allow communication with all hosts and
networks including those not permitted by the rules described
under Advanced > Security > IPSec > Rule1 (to Rule3) on
page 48. Select Deny to allow communication only with the
hosts and networks permitted by the rules.
Authentication
Type Specifies the authentication type used for IKE phase1. To set
a character string as the shared key and use it for
communication, select Pre-shared and enter the string of
the pre-shared key in the text box. To use a CA-issued
device certificate or root certificate, select Certificates.
When you select Certificates, the contents of the CA
certificate and root 1 to 3 certificates are displayed if they are
enabled. When you click the CA or Root button, you can
view, import or delete CA-issued or root certificates.
Rule1 (to Rule3) Shows whether the set rule is enabled or disabled. To enable
or disable the rule, refer to Advanced > Security > IPSec >
Rule1 (to Rule3) on page 48.