Kyocera COMMAND CENTER Multifunctional Printer - Manual (Page 9)

COMMAND CENTER Pages
Operation Guide 5
Item Description
Network >
General This allows you to verify the current settings for LDAP, TCP/
IP, IPP, IPP over SSL, AppleTalk, NetBEUI, IPv4, and IPv6.
For more information, refer to Advanced Page on page 33.
Network > IP
Filters This displays the list of IP addresses and subnet masks
(IPv4) or prefix length (IPv6) that have access permission as
set under IP Filters (IPv4) and IP Filters (IPv6) on the
Advanced page. If no IP addresses have been designated,
then access permission will be granted to all addresses.
For more information, refer to Advanced > Protocols > TCP/
IP > IP Filters on page 35.
Network >
SNMP
This allows you to verify the settings made under SNMPv1/
v2 and SNMPv3 on the Advanced page.
For more information on SNMPv1/v2, refer to Advanced >
Management > SNMP > SNMPv1/v2c on page 42.
For more information on SNMPv3, refer to Advanced >
Management > SNMP > SNMPv3 on page 43
Network >
POP3/SMTP
This allows you to verify the E-mail-related settings made on
POP3 and SMTP pages of the Advanced page.
For more information on POP3, refer to Advanced > E-mail >
POP3 > General on page 41.
For more information on SMTP, refer to Advanced > E-mail >
SMTP > General on page 39.
Network >
Logical Printers
This allows you to verify the settings made on the Logical
Printers page of the Advanced page.
For more information, refer to Advanced > Protocols > TCP/
IP > Logical Printers on page 36.
Network >
Netware This allows you to verify the settings made on the Netware
page of the Advanced page.
For more information, refer to Advanced > Protocols >
Netware on page 37.
Security This allows you to verify the current settings for secure
protocols, IEEE802.1x, and IPSec. To change the settings:
For secure protocols, refer to Advanced > Security > Secure
Protocols on page 46; For IEEE802.1x, refer to Advanced >
Security > IEEE802.1x on page 46; For IPSec, refer to
Advanced > Security > IPSec > Rule1 (to Rule3) on page 48.
Device/Printer This allows you to verify the settings made on the Basic and
the Printer pages.
For more information, refer to Basic Page on page 7 and
Printer Page on page 15.
Device/Printer >
APL. Filter This allows you to verify the settings made on the Basic and
the Printer pages.
For more information, refer to Printer Page on page 15.
Device/Printer >
APL. Filter
Parameters This allows you to verify the settings made on the Basic and
the Printer pages.
For more information, refer to Printer Page on page 15.
Scanner
This allows you to verify the settings made on the Scanner
page.
For more information, refer to Scanner Page on page 18.