Kyocera KM-NET - Manual (Page 14)

Add Printing System Wizard
10 KM-NET for Clients
4. Add Printing System Wizard
To search for printing systems to be registered, click Add . The Add Printing
System Wizard starts.
4.1. Adding the Printing Systems Using Standard Mode
To add the printing systems using standard mode, perform the following procedure.
1
Select Standard.
2
Select the check box for Network or Local connection according to the desired
printing system.
3
Click Next.
4
Perform the instructions displayed by the wizard. The instructions are different
depending on the connection type selected above.