Kyocera KM-NET - Manual (Page 7)

Operation Guide 3
Installation and Startup
2. Installation and Startup
2.1. Installation
Install KM-NET for Clients on your computer.
Note
Before installing this application, check that the KX driver is installed on the computer.
KX Driver is on the CD-ROM supplied with the printing system.
Insert the CD-ROM that came with the printing system into the optical drive of the
computer.
The installation program starts up automatically. Follow the installation instructions.
2.2. Startup
When the installation is completed, start the KM-NET for Clients by proceeding from
the start menu > All Programs > Kyocera > KM-NET for Clients.