Frpo parameter setting – Kyocera KM-NET User Manual

Page 53

Advertising
background image

Operation Guide

49

Broadcast

The Broadcast dialog box appears.

2

Browse the command file or enter the command in the Broadcast text box. The
maximum length of command is 256 characters.

3

Click Send to send the command to the printing system.

9.2. FRPO Parameter Setting

Perform the following procedure to change the FRPO parameter.

1

Click Broadcast to open the broadcast dialog box. The Broadcast dialog box
appears.

2

Enter the parameter (for example R4) in FRPO.

3

Click Get. The current value is shown in Value.

4

Erase the current value and enter the new value. For example, to change the
default paper source to the MP Tray in the above example, enter 0 instead of 1 in
Value.

5

Click Set. The value is changed.

Advertising